Home › Forums › eaDocX queries › eaDocX fails on sample project
Home › Forums › eaDocX queries › eaDocX fails on sample project
- This topic has 9 replies, 2 voices, and was last updated 11 years, 9 months ago by
eadocX Support.
-
AuthorPosts
-
6 November 2012 at 12:44 pm #6284
Patrick Julian
ParticipantHey there,
this doesn’t quite look like a kickstart.
Win 7 Prof SP1, EA 9.1, MS Word 2007First I get this after clicking the “Quick Document” command:
And after confirming the msg box, this AccessViolation follows:
I can reproduce that error.
Interestingly, eaDocX reports a success msg even after the failure has been detected.
6 November 2012 at 1:48 pm #6285eadocX Support
ParticipantWhich model are you using to create this error? Is it one of our example models? If not, please can you send the model and I will try to reproduce the error.
Thanks.16 November 2012 at 1:19 pm #6286Patrick Julian
ParticipantHere you go:
https://www.dropbox.com/s/3xcjcxonhdlj896/eaDocX.eap
-
This reply was modified 11 years, 9 months ago by
Patrick Julian. Reason: adding attachment didnt work, replaced with dropbox link
16 November 2012 at 2:55 pm #6289eadocX Support
ParticipantThanks for this – I just successfully generated a document from this model, so there must be something interesting happening with your environment.
I think I can see from the error message above that there is a problem when eaDocX is talking to Word: which Word version do you have, and can you also send a screen-shot of the message which is in the image above: I can’t quite read the error details.
Thanks19 November 2012 at 5:42 pm #6290Patrick Julian
ParticipantIt is Word 2007.
Here is a closeup:It says: It has been tried to read or write in protected memory. In many cases this is a hint that other memory is damaged. at Microsoft……etc
EDIT:
Wow. Now it even crashed EA when I tried to generate a report from a package that contained nothing more than a diagram with a note inside. Crash signature was:
[code]Problemsignatur:
Problemereignisname: BEX
Anwendungsname: EA.exe
Anwendungsversion: 9.1.0.909
Anwendungszeitstempel: 4e5d76b6
Fehlermodulname: mscorwks.dll
Fehlermodulversion: 2.0.50727.5466
Fehlermodulzeitstempel: 503f0115
Ausnahmeoffset: 00281ad6
Ausnahmecode: c0000409
Ausnahmedaten: 00000000
Betriebsystemversion: 6.1.7601.2.1.0.256.48
Gebietsschema-ID: 1031
Zusatzinformation 1: 5bef
Zusatzinformation 2: 5beff8ab869867380dff161b91b6e136
Zusatzinformation 3: 345a
Zusatzinformation 4: 345afd4710f9bbbad21467fc58377fc6Lesen Sie unsere Datenschutzbestimmungen online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0407Wenn die Onlinedatenschutzbestimmungen nicht verfügbar sind, lesen Sie unsere Datenschutzbestimmungen offline:
C:Windowssystem32de-DEerofflps.txt
[/code]-
This reply was modified 11 years, 9 months ago by
Patrick Julian. Reason: +crash report
19 November 2012 at 6:21 pm #6293eadocX Support
ParticipantDid you try the installation verification test ? This just uses the low- and high-level EA and eaDocX interfaces.
From the EA main menu, select Extensions | eaDocX | Help | Check Installation. Then let me know what happens.
Sounds like something in your Word installation is new to eaDocX.
Thanks19 November 2012 at 8:30 pm #6294Patrick Julian
ParticipantHm. In the meantime I have installed the Office 2010 trial.
Now it only says “Failed to insert new section. Please re-start EA and eaDocX and re-load the document. If problem persists, please contact eaDocX support.”
Additionally, in Office 2010, there is a GUI error:
The only modification that I made to Word 2007 was to activate the display of the developer toolbar in the UI (can be done under under Word Options). I deactivated that and it had no effect so I think we can rule that out.
Quite interestingly, after I uninstalled the Office 2010 trial and went back to Office 2007, the Installation Validation now says “High Level interface is ok”. Also the generator runs without the fatal exception.
However, the document rendered only contains the very first page which reads “Quick Document
Produced using eaDocX ‘Quick Document’.”
The other sections are only visible as an entry in the preview on the left side.26 November 2012 at 12:46 pm #6295Patrick Julian
ParticipantI uninstalled the Office 2010 trial again.
Back with Office 2007, I could reproduce the AccessViolationException with the very same message when generating a quick Document from another package.Trace output from eaDocX is the following:
[code]eaDocX Trace Information
==========================26.11.2012 13:41:16 – Opening QuickDocument
26.11.2012 13:41:20 – Bookmark: Info was defined in the profile, but isn’t in the document any more. It will be deleted from the profile.
26.11.2012 13:41:21 – Inserting document Info section
26.11.2012 13:41:21 – Generating Quick Document
26.11.2012 13:41:21 – Generator started: eaDocX Version 3.2.5.2
26.11.2012 13:41:21 – Generator setting: Full
26.11.2012 13:41:21 – Deleting existing bookmarks from document
26.11.2012 13:41:21 – Starting generating section Section1
26.11.2012 13:41:21 – Generating Section: Section1
26.11.2012 13:41:21 – Gen>>CommonInlinePackage, Katalogbestellung
26.11.2012 13:41:21 – Gen>>Collection starting
26.11.2012 13:41:21 – Gen>>GenericTable of: UseCase
26.11.2012 13:41:22 – Gen>>Collection starting
26.11.2012 13:41:22 – Gen>>GenericTable of: Actor
26.11.2012 13:41:22 – Gen>>CommonInlinePackage, Rqmts
26.11.2012 13:41:22 – Gen>>CommonInlineRequirement, Der Webshop muss dem Besucher die Möglichkeit bieten, durch ein Formular im Webshop einen Print-Katalog zu bestellen.
26.11.2012 13:41:22 – Gen>>CommonInlinePackage, Tests
26.11.2012 13:41:22 – Gen>>Collection starting
26.11.2012 13:41:22 – Gen>>GenericTable of: UseCase stereotype: testset
26.11.2012 13:41:22 – Gen>>Collection starting
26.11.2012 13:41:22 – Gen>>GenericTable of: UseCase stereotype: testsuite
26.11.2012 13:41:22 – Added Package: Katalogbestellung
26.11.2012 13:41:22 – Section generated OK: Section1
26.11.2012 13:41:22 – Generating cross references
26.11.2012 13:41:22 – Finding forward refs
26.11.2012 13:41:22 – Crossrefs>>UnloadProject erro inserting refs
26.11.2012 13:41:29 – Generate successful
26.11.2012 13:41:29 – Quick Document generated OK
[/code]Again, eaDocX installation verification shows nothing unusual.
The document is rendered but only in parts, with cryptic output like
[code]¶BM,{F470B722-19A9-4dc0-9F97-CF2D8FBF8D60},INLINE§”[/code]
still left in the middle of the text and tables.-
This reply was modified 11 years, 9 months ago by
Patrick Julian.
26 November 2012 at 12:51 pm #6297eadocX Support
ParticipantIs it possible for you to send a small .XMI and document to support@eadocx.com, and I will try to reproduce the error .
Thanks28 November 2012 at 12:36 pm #6298eadocX Support
Participant..Also the User Interface error is quite deliberate: if the a user closes Word from within Word (as opposed to closing it from eaDocX, which is fine) then this causes EA to fail!
This is a ‘feature’ of the Word API, so we thought it was safer to blank-out the Word ‘close’ button. -
This reply was modified 11 years, 9 months ago by
-
AuthorPosts
- You must be logged in to reply to this topic.
Download a free trial
Download eaTeamWorks today for several free for life features, plus no obligation, 30-day trials of all the products: eaDocX, ea Revision Manager, eaSheets, Model Expert and PortfolioManager. Discover for yourself why we sell the world’s best-selling Enterprise Architect extension.
Download